Part Number 3080006.001, Rev. D
©2012, HES, Inc.
7
14
Install the single-door strike plate.
14a. Place the strike plate over the pilot holes. Insert and tighten two screws in the slotted holes.
14b. Close the door to verify installation. Adjust the strike plate if necessary.
14c. After adjusting, insert and tighten the lock down screw on the strike plate.
OPTIONAL DOUBLE-DOOR INSTALLATION
15
Install the Double-Door Strike Plate Mounting Bracket (Model 620-DD).
15a. Place the bracket on door, making sure it aligns with the mark made in Step 2c and the edge of the
door. Mark the door.
15b. Remove the bracket and drill pilot holes at the two marks.
15c. Install the bracket using the mounting screws provided.
16
Install the double-door strike plate.
16a. Place the strike plate over the holes on the 620-DD bracket. Insert and tighten the two 6-32 X
5/16”screws provided with the 620-DD option.
16b. Close the door to verify installation. Adjust the strike plate if necessary.
16c. After adjusting, insert and tighten the lock-down screw on the strike plate.
Place strike plate and
adjust.
14a-b.
14c.
Set strike plate
position with lock
down screw.
15a. Align the bracket with the line and edge of
the door.
Place the bracket and drill two pilot holes
16.a-b.
16.c
.
Set
the strike plate
position with the
lock-down screw.
Place the strike plate
and adjust.
Note:
Do not
install lock-down
screw until the
strike plate is
correctly adjusted.
Note:
Do
not install
the lock-
down
screw until
the strike
plate is
correctly
adjusted.
15b. Place the bracket and drill two pilot holes
15c. Install and tighten mounting screws.
