HES HS7003B, User Manual

Page: 9 / 31

CHAPTER 3 UNPACKING AND INSTALLATION
3-1 INTRODUCTION
This chapter is to introduce how to take out this roller coater from
case and how to install this roller coater and related accessories
properly.
3-2 UNPACKING AND INSTALLATION
This roller coater has been assembled before delivery. Please pay
attention on the process of taking this roller coater out from case,
please put hands under bottom of machine then take it out. It is
forbidden that take this machine out by holding other components of
this machine.
3-3 MACHINE INSPECTIONS
After tacking out the roller coater, the following items are
suggested to check.
1) Check the surface and control panel of this roller coater are
damaged, scratched, eroded or rugged.
2) Open the protective cover, checking whether the electrical wires
in control box are loosened or not.
3) Check all the connected components if they are assembled together
or not.
3-4 INSTALLATION OF ROLLER COATER
Place the roller coater on the flat and proper position that near
production line, and make sure the control panel is easy to operate.
There must be enough space for operators to work.
1) Place the machine on a flat surface, and fix the machine by four
screws fixed on the double edge of machine.