HES HS7003B, User Manual

Page: 8 / 31

normal or not. Subsequently run the PID of heating area. On first
time to start the motor everyday, please make sure HMA in tank is
melted completely. It will take about 30 minutes to melt HMA
completely.
2) PID TEMPERATURE CONTROLLER
This PID controller includes many functions, like digits display,
alert, adjustment, etc. Especially for temperature adjustment,
because that temperature is measured by RTD then transfer signal to
PID. PID controller will decide whether heater or not accordingly.
3) DRIVING SYSTEM
The motor could be started after temperature is reaching setting
value. Motor will drive the gears of rollers through chain after
starting. The lower roller is dipped in tank, and the HMA could be
rolled up by rolling. Put the material on roller, and then HMA could
evenly be coated on the surface of material.
SPECIFICATION OF MOTOR:
VOLTAGE 220VAC
POWER 200W
FREQUENCY 50HZ