2-2 SPECIFICATION
ITEM
HS7003A-BA
POWER REQUIREMENT
ψ
220VAC/50HZ
POWER
1.9KW
WEIGHT
45KG
DIMENSION
470*360*300
ROLLER WIDTH
180MM
TANK CAPACITY
3.3L
MAX. VISCOSITY
20,000CPS
MELTING RATE
3.35KG/h
2-3 FUCTIONS
1) HEATING SYSTEM
Heaters in the bottom of tank and inside the roller provide heating
for HMA. Mechanic temperature controller would automatically control
temperature accordingly. Please start the motor after HMA being
melted completely for protection. It will take about 30 minutes to
melt HMA completely.
The tank of this roller coater uses power-heating system. Heaters
and RTD are in the bottom of tank and inside the roller. Temperature
of heating system is detected by RTD, and then transfer signal to
the PID, at last PID will decide whether heat or not accordingly.
When the power is turned on, the temperature control system will
firstly check the electro-circuit, checking the SSR and RTD are
normal or not. Subsequently run the PID of heating area. On first
time to start the motor everyday, please make sure HMA in tank is
melted completely. It will take about 30 minutes to melt HMA
completely.
