1) PID TEMPERATURE CONTROLLER
SV
: Setting Temperature
PV
: Present Temperature
Press
△╱▽
buttons to adjust setting temperature.
No
DISPLAY
Specification
1
PV
Displaying Present Temperature of
tank
2
SV
Displaying Setting Value
3
AL
Indicator for Alarm: ON/OFF
4
OUT
Indicator for output: ON/OFF
5
AT
Indicator for Auto Tune: ON/OFF
6
SET
Select/confirm Key
7
▽
Decrease Key
8
△
Increase Key
9
AT(key)
Auto Tune Key
2) MAIN POWER SWITCH
Switch to “ON” position, this light inside switch will be on, meaning
the power is turned on.
3) START SWITCH
Press this switch to start motor. Please make sure HMA inside tank
is melted completely before starting motor.
4) STOP SWITCH
Press this switch to stop motor.
5) VOLTMETER
This voltmeter is to display the working voltage of heater of roller.
Use high voltage for high viscosity HMA; use low voltage for low
viscosity HMA. The voltage of voltmeter can be adjusted by turning
the resistance that inside side plate.