6-2-2 THE WAY TO CLEAN THE ROLLER
1) Once cloth or any impurity fall into melting tank during
operation, please clean it out. Those stuff will affect glue
coating.
2) Start the motor with lower speed, and turn the knob behind
machine to increase glue amount.
3) After finishing above steps, impurities will be rolled out by
roller running. And please stop machine and remove impurities
by tools.
6-2-3 MAINTENANCE OF DRIVING SYSTEM
It’s very important to maintain driving system of this machine.
Because this part is close to melting tank, although this part
protected by cover, it is still possible to be stuck by HMA. Driving
system will be affected by HMA being solidified on chain or gear.
Even cause motor or inverter to get damaged. If any HMA on chain,
please clean it right away by tools.
Besides, it is necessary to smear lubricant on chain and gear, and
check if any HMA leakage occurs from tank.
