1-4 PRECAUTION DURING OPERATION
1) Do not use the equipment as a ladder or stepping tools.
2) Avoid some sharp tools or some impurities damaging the surface
of roller while cleaning.
3) Please start the motor after making sure HMA of tank is melted
completely.
4) Use only the metal base when attempting to lift or move applicator.
Do not use covers, doors, panels, braces or grips of equipment.
5) If accident occurs, like finger or some stuff are rolled by roller,
please immediately press the stop switch to stop machine.
6) Do not wear gloves while operation to avoid hand being rolled
by roller.
1-5 SAFETY DURING MIANTENANCE
The main precautions to be adopted when carrying out maintenance are:
1) Disconnect the electrical power supply before maintenance the
equipment.
2) Do not wear rings, watches, bracelets, etc. when carrying out
the maintenance.
3) Do not in any way to disassemble or adjust any component of
equipment unless another person who can provide immediate
assistance is nearby.
4) Only qualified person can do maintenance on the equipment.
5) Do not touch bare connection or component without disconnecting
the electrical power supply while power is on. Dangerous voltage
exists at several points in the equipment.
6) Disconnect the power supply before removing any protection case
or changing any electrical components.
7) If possible, please stand on a rubber insulating mat when carrying
out maintenance. Do not work on wet floor or in very damp
surrounding.
8) Always wear the protective glasses, clothing and heat-resistant
gloves to avoid being burned by hot surface of components or
molten glue.
9) Do not use any tool that is with flaming or a sharp tip to clean
