8
T-Control
56
Betriebsanleitung_commotherm_5_15_SW_WW_Touch_Englisch_V1.2
8.11.7
Server – settings
Navigation:
111
OK
Screen:
figure 8.30: Mail – Server settings
If the following field is pressed:
smtp.1und1.de
the mail server address can be entered (=outgoing mail server)
touch@herz-
energie.at
the heat pump’s E-mail address can be entered
Password
the password can be entered
touch@herz-
energie.at
the username can be entered
SSL
the encoding can be chosen (no, SSL, TLS)
465
the corresponding port of the provider can be set.
Note:
To send mail at the adjusted values (error, warning, information according to figure 8.26), the boiler has to
have a valid E-mail address. After the successful creation of an E-mail address you can set up the
exemplified values shown in figure 8.30.
Look up the data of the mail server and the port number at your provider (for example GMX).
After successful configuration of the mail server settings the boiler will send E-mail with the set up values
