8
T-Control
20
Betriebsanleitung_commotherm_5_15_SW_WW_Touch_Englisch_V1.2
8.3
Main menu
After start up figure 8.3 will appear. In the centre of the screen important values according the boiler, buffer,
hot water tank, heating circuit and so on are shown. The shown values can be adapted individually (see
chapter 8.7.1).
figure 8.3: Main menu
If the following symbol is pressed
the main menu will be displayed.
(see figure 8.3)
fault messages (warnings & alarms) will be displayed.
(see figure 8.14)
the individual modules (heat pump, hot water tank, buffer, heating circuit, solar) will
be displayed.
(see figure 8.15)
the menu settings (network configuration, E-Mail, screen saver) will be displayed.
(see figure 8.19, visible only with code!)
the date & time can be set up.
(see figure 8.6, visible only with code!)
the code input screen will be shown.
(see figure 8.4)
Ready
in general the field is used to display the operating conditions (see chapter 6).
more important values will be shown on the second page.
