Herutu TW-800R-EXL, Manual

Page: 3 / 28

TW-800R-EXL
1
■General outline
This instruction manual describes "TW-800R-EXL" (hereinafter referred to as "receiver").
"TW-800R-EXL" is a receiver with LAN connection specification of TW-800 series.
"TW-800R-EXL" has XPort of Lantronics Corporation as a conversion module for LAN connection.
For XPort, if you would like to check the details that can’t be explained in this manual or more details,
please refer to the XPort manual published by Lantronics.
Also, the receiver can communicate with multiple TW-800T (hereinafter referred to as transmitter).
This instruction manual mainly describes the functions of the extension unit. For details about the
functions of "TW-800R" and "TW-800T", please refer to the "TW-800R Instruction Manual".
<Feature>
◆
The receiver can communicate with multiple transmitters by doing
“
pairing
”
.
The number of transmitters which can register pairing to one set of a receiver does not have restriction.
Receiver doesn
’t remember ID number of transmitter. (It cannot read from a receiver ID of the transmitter
which is registered pairing, and how many set pairing is registered.)
◆
The rec
eiver outputs data received from the transmitter to the internal CPU → XPort in a dedicated
format.
At the same time when data is output to the internal CPU → XPort, the buzzer sounds and the relay
output turns ON. (Buzzer ringing and relay output time depends on setting.)
The LAN output from the receiver depends on the XPort specification.
* "Pairing" used within this operation manual means the work which registers a transmitter and a receiver.