Herutu TW-800R-EXL, Manual

Page: 8 / 28

TW-800R-EXL
6
■Network communication
In order to connect the receiver to the network, you first need to set the network settings according to the
network environment. For details of the setting method, refer to the attached "LAN Setting Manual for
TW-800R-EXL".
― Factory default settings ―
IP address 192.168.3.100
Subnet mask 255.255.255.0
Default gateway 0.0.0.0
Port number 50001
●Connector
For the connector use RJ45 type.
The pin specifications are shown in the following table.
Pin number Signal name
1 TX+
［
Transmission data(+)
］
2 TX-
［
Transmission data(-)
］
3 RX+
［
Receiving data(+)
］
4 Unused
5 Unused
6 RX-
［
Receiving data(-)
］
7 Unused
8 Unused
Please use the cable of the category 5 or higher standard.
1
・・・・・・
8