Herutu TW-800R-EXL, Manual

Page: 17 / 28

TW-800R-EXL
15
■How to use
1. Power switch of receiver is turned on. Please confirm the LED situation as turning off.
When the LED for receiving turns on, the transmitter is not registered by pairing. Please make a pairing
with transmitter.
2. The transmitter transmits the signal when the limit switch is turned on.
When the communication is done normally, receiver output LAN output and receiver sounds the buzzer
and output relay output according to setting. Green LED of transmitter turns on 1 time.
When the communication is not done normally, receiver doesn
’t move.
Red LED of Transmitter flashes 10 times
While the receiver output relay output or while receiver is in double count protect time or while buffer of
receiver is full, receiver transmit the
“BUSY” signal to transmitter. When the transmitter receives the
“BUSY” signal, the Green LED of transmitter is flashed 4 times.
Transmitter Receiver
Communication OK Green LED 1 time flashing LED 1 time flashing
Communication NG Red LED 10 times flashing
－
BUSY Green LED 4 times flashing
－
Buzzer sound time is usually for 100ms.When the relay output is set 50mses and double count protect
time is set 10mses, Buzzer sound time is 50msec.
`*When the transmitter is not done
“Pairing” transmits, Red LED will be flashing 3 times.
LED for receiving (Green)
(Lighting switch for pairing)
LED (Green & Red)