Herutu TW-800R-EXL, Manual

Page: 13 / 28

TW-800R-EXL
11
■Name and function of each part
●Receiver TW-800R-EXL
1.Power switch For power ON and OFF
2.Terminal block of
power source
Terminal block for power source of DC24V(M3)
3.DIP switch 1 DIP switch for setting (6 selection)
4.DIP switch 2 DIP switch for setting (6 selection)
5.Output terminal block Photo-mos relay output terminal block(M3)
6.RX light switch : Green
(for Paring switch) Led lights at receiving the signal from transmitter for OUT1 normally.
Also RX light switch is used for paring.
7.LAN connector Connector for LAN (RJ-45)
8.Antenna
2 antennas for Diversity type. Antennas is dipole type.
One is all-in-one, one is possible to take off.
When it is set external antenna, it is set by means of taking off ANT2.
*ANT2 is fixed by resin before shipment by regulation of FCC/IC in an applicable
country.
9.Buzzer
Buzzer sounds at receiving the signal from transmitter.
It is possible to set sounds on and off, or big and small.
Sound pressure 95dB/m
10.Led of Power(Red) It lights at power ON.
11.LED of communication
monitor
It is LED for monitoring communication situation.
1
10
2
8
6
4
11
3
9
This label is added
For FCC/IC.
7
5
Main body Extension unit