Herutu TW-800 Series, Operation Manual

Page: 17 / 33

TW-800
15
■ Setting
It needs “pairing” a transmitter and a receiver before using. Transmitter and receiver communicate by recognizing
the other party's recognition signal by pairing.
● Pairing (Registration)
1. Power Switch is turned on pushing the lighting switch for paring of a receiver.
To enter “Pairing mode” only 10 seconds with flashing the lighting switch for pairing.
2. You continue pushing the “pairing switch” over 3secondsof transmitter by a long and slender thing.
3. It is completed the pairing between transmitter and receiver, then the lighting switch of receiver is turned off.
4. It can communicate with transmitter being pairing, you turn off the power switch of receiver once.
● Delete the pairing
1. Power Switch is turned on pushing the lighting switch for paring of a receiver.
To enter “Pairing mode” only 10 seconds with flashing the lighting switch for pairing.
2. You continue pushing the “lighting switch for pairing” over 2 seconds, then the lighting switch is turned on.
The transmitter which is register by pairing is deleted.
◆
Caution
Please keep in mind that a transmitter cancels the pairing information (registration information on a receiver)
which was carrying out the memory, and the communication with the receiver which was carrying out pairing
becomes impossible if a receiver carries out the long aggressiveness of the pairing switch of a transmitter 3
seconds or more in the state where it is not in pairing mode.
The lighting switch for pairing.
Power switch
Pairing switch