Herutu TW-800 Series, Operation Manual

Page: 21 / 33

TW-800
19
● TEST SWITCH
There is a test switch for checking the battery and communication. When the transmitter transmit the signal by
test switch not limit switch, receiver doesn’t output relay output. But LED of receiver only turns on.
Also transmitter make a checking the battery at pushing the test switch. You can know the battery situation by
transmitter LED and Receiver LED
TEST SWITCH is combination with Pairing switch. To continue pushing the switch over 3 seconds, transmitter
transmits the “paring signal”. Please take care
Transmitter Receiver
Communication
check
OK: Green LED 1 time flashing
NG: Red LED 10 times flashing
LED 1 time flashing
Battery power
low level
Red LED 1 seconds lighting LED 2 times flashing
*Trasnmitter displays the situation of battery power low level after transmitter displays communication check
result(OK or NG).
TEST SWITCH