Herutu TW-800 Series, Operation Manual

Page: 10 / 33

TW-800
8
■ Name and function of each part
● Transmitter TW-800T
1.Seat Seat is for setting torque wrench and plier wrench and so on.
2.Hole of bracket The hole is for mounting the base of torque wrench of LS type and seat
3.Case
Case for main body. It is used indestructible polypropylene materials.
4.LED(Red/Green)
LED is for confirmation of communication and battery checking. Depend on the situation,
LED is lighting and flashing
5.Test switch
(Pairing switch)
For Test switch and paring switch.
6.Screw for fixing The screw is for mounting main body and seat
7.Limit switch
Limit switch is for input the signal from torque wrench.
It is fixed the mount base of torque wrench by hexagon screw.
8.Battery
Battery is coin battery. Type is CR-2032
1
7
2
3
4
5
6
8
Label is changed for FCC/IC.