Herutu TW-800 Series, Operation Manual

Page: 3 / 33

TW-800
1
■ General outline
TW-800 is constituted by a Transmitter[TW-800T] and a Receiver [TW-800R]
Once the TW-800T is mounted on the Torque wrench a tool of others with Limit switch (LS), the tightening
completion signal of Torque wrench can be transmitted to each series of our TWF-800R.
<Feature>
◆
Reliable communication
TW-800 can communicate automatically by selecting the channel from 78ch in 2.4GHz bandwidth.
TW-800 transmits the signal reliably by 2way communication.(You can look see the communication OK/NG by
LED lighting and flashing.)
◆
TW-800T has the function of remaining battery level notice.(At using test switch)
If remaining battery level is low at using test switch, you can look see the LED situation of TW-800T and
TW-800R.
◆
TW-800T uses CR2032 type of battery for small size and light weight.(Size is same as TW-510T)
◆
The case of TW-800T is used polypropylene for protecting broken the case.
◆
TW-800 uses the communication band which can be used worldwide.
◆
TW-800T has test switch for test communication and battery remaining check.
◆
It is easy to set the registry of TW-800T and TW-800R.
It is easy to do
”
Pairing
”
with TW-800T and TW-800R.It is not necessary to manage the channel and ID.
◆
TW-800R can be set various setting
1.Buzzer: On/Off
2.Buzzer volume:2 kinds Small/Big
3.Output time of Photo-Mos relay: 4kinds 50ms/200ms/400ms/1s
4.Double-count protect time: 4 kinds 10ms/200ms/1s/2s
◆
The power source of TW-800R is DC24V.
The power source of TW-800R that is often connected with controlled equipment is DC24V.
It can be used AC100-240V by using AC adapter of option
※
For the cause of transmitter ”TW-800T” and receiver “TW-800R” recognize both sides by pairing, equipment
configuration is set to 1to 1.It can’t be used two or more sets of transmitter for one set receiver.