T1 (Gen 3) WIRELESS THERMOSTAT
Displays & Buttons
Operating Instructions
1. Insert the batteries
2. To pair with the R1:
•
Turn off the T1 controller
•
Long press “boost” button on the R1 until LED1
is flickering
•
Long press MENU button on T1 until a code
shows on the screen. Then press MENU button
again.
3. To pair with internet hub (if purchased):
•
Place hub into “waiting for pairing” (see hub
instructions)
•
Turn Off the T1 controller
•
Long press MENU button on T1 until a code
shows on the screen. Then press the MENU
button again.
•
The code on T1 will flash until pairing with the
hub is complete. The LED 2 on the Hub will also
stop flashing.
Time and Day setting
1. Turn T1 on.
2. Press the MENU button for 3 seconds until the
minutes display flashes. Press the Up or Down
arrow buttons on the display to change the
value (each press = 1 minute).
3. Press the MENU button again to change the
hour display. Press the Up or Down arrow
buttons to change the value (each press = 1
hour). This is a 24 hour clock.
4. Press the MENU button again to change the
day. Press the Up or Down arrow buttons to
select
On/Off
Weekday
Clock
Temperature
Display
Heating
On
Mode
Programming
Function
Select
Mode
& Adjust
Clock
Return
