23
Pin assignment of the control box:
Red:
hand control
Black:
head part of lying surface
Yellow: foot part of lying surface
Blue:
end panel - head
White:
end panel - foot
Mattress brackets can be disassembled for the
transport. With the supplied tapping screws,
attach them to the headrest and footrest as
shown in the picture.
Before operating the bed, make a motor reset as
described on page 15.
Standard side rails:
For the installation of continuous side rails, pull
the integrated bed extension a little bit to the
outside (see below). Next, place the side rail on
the receptacle latches and screw them together.
After all side rail are installed, slide the end pan-
el back and tighten the screws again.
Telescope side rails:
Place the outer posts approximately at the end
of the lying surface and the middle posts approx-
imately in the centre on the longitudinal frame
of the lying surface.
Summary of Contents for practico ultra low 9.5/80
Page 1: ...Installation Instruction and User Manual practico ultra low 9 5 80 ...
Page 33: ...33 8 Guidelines and manufacturer s declaration ...
Page 34: ...34 ...
Page 37: ...37 ...