Hermann Bock practico ultra low 9.5/80, Installation And User Manual, Page: 16 / 40

16
3.4 Hand control (lock functions)
The hand control comes with an integrat-
ed disabling function that can be activat-
ed and deactivated with the correspond-
ing key. To disable the entire electrical
function, insert the key in the keylock on
the backside and turn the lock function
on or off with a corresponding twist of
the key.
A: Key
B: Activation of the hand control buttons
C: Deactivation of Trendelenburg and ultra-low
D: Deactivation of the hand control buttons
Hazard note by Bock
Please make sure that the hand control cable is not lead under one of the aluminium longitu-
dinal frame bars. In case of lowering the bed completely into its ultra-low position (floor level),
the cable can get damaged.
Execute the reset-function before the initial operation of the bed and after each disconnection
from the power supply system.
Pay attention to the position of the castors, especially when using the comfort-sitting, Trende-
lenburg and Anti-Trendelenburg position.
Respect that when using accessories and splitted side rails, the bed is only allowed to go down
to the second safety stop at 15.5 cm. When lowering the bed to its ultra-low position (floor
level), pay attention to the high crushing hazards (feet, toes and objects e.g. cables) under the
aluminium longitudinal bar and end panels.