background image

Bedienungsanleitung / Owner Manual 4000 Pro                                                                

10

Herkules Motorgeräte

                                   www.herkules-garten.de

SAFETY PRECAUTIONS

GENERAL

 

Study  the warning stickers on  the machine.

Replace  any  damaged  or  illegible  warning

stickers.

 

Read the instructions carefully. Find out

what the controls do and learn how to use

the machine correctly.

 

Never use the machine if there are people,

especially children, or animals nearby. Never

let a child or adult use the machine if they

are not familiar with these instructions.

 

Persons under the age of 16 are not allowed

to use the machine

 

The user is responsible for any accidents

that happen to other people or their

property.

PREPARATIONS

 

Wear safety gloves, safety goggles and

hearing protection. Avoid wearing loose-

fitting clothes.

 

Keep a steady stance. Do not lean over the

machine.

 

Make sure the machine is on firm, level

ground before starting. Do not stand the

machine on gravel paths or the like. Objects

that are thrown out may bounce and cause

damage.

 

Make sure that all nuts and bolts are

securely tightened before use.

 

Only use the machine in dry surroundings,

never outdoors in the rain.

 

Do not use the machine if it has a faulty

safety device or if a guard is missing.

OPERATION

 

Avoid starting accidentally. Make sure

machine is switched off before plugging it in.

 

Do not feed hard objects, such as stones,

bottles, cans or pieces of metal into the

machine. They can cause damage to the

blades and motor.

 

If the machine is blocked, stop the engine

and unplug from the mains. Remove

obstruction and check for damage.

 

Fully understand the correct function of the

machine before attempting to start.

 

Rotating parts, particularly the chopping

motor, will continue to rotate for a short

time after stopping the engine.

 

Be  very  careful  when  handling with fuel

particular do not re-fuel near naked flames,

any possible ignition source or when the

engine is hot. Do not smoke when re-

fuelling.

 

Before re-fuelling stop the engine and allow

to cool. It is always better to refuel the

engine before work whilst the engine is cold.

 

Do not re-fuel in enclosed areas and avoid

fuel spillage by using correct containers and

funnels. In particular, keep the machine

clean to avoid the build up of inflammable

dirt.

 

Operate only on solid, firm ground.

 

Never leave the machine unattended with

the engine running and always shut off the

fuel tap when not in use. Disconnect the

main supply plug on units with electric

motors.

 

With electric powered machines, always

disconnect the main supply by removing the

plug before working on the unit. With petrol

engines, always disconnect the sparking plug

lead when working on the machine.

 

The belt drive and safety switches must be

correctly attached, otherwise the safety

switch will prevent the machine from

starting.

 

Do not jerk the power lead or stretch it

tight.Otherwise connections or insulation

may be damaged. (units with electric

motors)

 

Such damage is invisible but dangerous.

 

Always keep the power lead clear of the

machine. (units with electric motors)

 

Remove the plug from the socket and check

the lead regularly for signs of damage or

ageing. Replace the lead if necessary. (units

with electric motors)

 

Do not use the machine if the power lead is

damaged. (units with electric motors)

 

If the fuse blows or the overload cut-out

trips this is a sign that the machine is

overloaded, or that toomany items are

connected to the same supply. Investigate

the cause and correct it. Do not fit a larger

fuse. (units with electric motors)

 

Keep your limbs and clothes away from the

feed funnel and outlet.

 

Do not stand near the outlet when the

machine is running.

Summary of Contents for 4000 PRO
























Reviews: