herdstar BinTrac Breeder Control Operation Manual Download Page 5 | Manualshive

Page: 5 / 52

herdstar BinTrac Breeder Control Operation Manual Download Page 5

Operation Manual

Version 2.0

5

Part Number MAN-000009

Loss-In-Weight (Unload Batch Method)

Pages 19 - 25

The Loss-In-Weight (Unload Batch Method) allows the user to select the target batch amount of feed required for
the day. The BinTrac Breeder Control System will enable the hopper or feed line fill system allowing the feed line
system to transfer the feed into the house until the required amount of feed has been delivered. In this
configuration, this system batches and unloads until the batch target amount is unloaded from the bin.

Inventory Bins with Dual Breeder Console Unloads

Pages 26 - 36

Dual Breeder Consoles can be connected to a single inventory bin for programmed batching of two independent
amounts on separate delivery systems. The system can be used for both rooster (Master) and hen (Remote)
feeding by enabling/disabling the appropriate feed delivery system. The system features an auto/manual override
feature for each auger via an external switch.

«
...
3
4
5
6
7
...
»

Summary of Contents for BinTrac Breeder Control





















































Reviews:

No comments