User manual Power Max L
44
HENSEL-VISIT GmbH & Co. KG
Technical data
Charger unit type
Charger Porty Lithium
Connector option:
Porty L battery / Power Max L battery
Input voltage:
Multivoltage (90-240 VAC)
Output voltage:
max. 16,8 V
Output current:
up to max. 8 A, automatic adjustment,
short-circuit proof and inverse polarity
protected
Charging time:
100% in under 1.5 h, 80% in approx. 45
min. (depending on capacity and age of
battery)
Weight in kg (without mains
cable):
0,83 kg
Housing dimensions (LxWxH):
190 mm x 111 mm x 43 mm
Ventilation:
active cooling via regulated ventilation
Scope of delivery:
charger with fixed charge cable, mains
cable with country-specific plug
Code no.:
5672
Subject to technical changes.
The listed data are standard values which may deviate depending on component tolerances
Connection and operation
The unit does not have a mains switch. It is ready when connec
-
ted to a power supply. A status display allows you to monitor
the charge process.
ATTENTION!
The charger must only be connected to grounded power sup-
plies.
The charger Porty Lithium is only approved for the charging of
Porty L / Power Max L batteries.
Â
Plug in the included mains cable into the mains connector
socket (on the back) and connect the mains plug to the
power supply.
The mains check
Power F
lights up red.
Â
Insert the plug of the charger cable
A
into the charge socket
13
of the battery and lock the plug by turning it clockwise a