Hensel Expert Pro, User Manual

Page: 8 / 30

User manual // Expert / Integra Pro (Plus)
8
HENSEL-VISIT International GmbH

Do not route cables across the studio floor if
possible, so that damage is excluded. If routing
across the studio floor cannot be omitted, then it
must be ensured that vehicles, ladders, etc. do not
damage cables. Damaged cables and cases must
be replaced immediately by customer service.

Ventilation slots of compact flashes must be kept
free during operation and sufficient air supply must
be ensured. Do not stick any objects into ventilation
slots or synchronization sockets. Do not deposit any
objects (tools, coffee cups, etc.) on the flash unit.

Flash systems must not be used in environments
with explosion hazard. Flammable materials, like
furnishing fabrics, paper, etc. must not be stored in
the immediate vicinity of compact flash units to
prevent fire hazards.

Compact flash units must be protected against humi-
dity and spray water.

Do not connect accessories from other manu-
facturers, even if they use the same or similar
connectors.

Flash units
– hanging from pantographs or ceiling –
must be doubly secured against falling down.

Do not flash into eyes at short distances (smaller
than 5 m) because this can lead to eye damage. Do
not look directly into the flash reflector; the flash
lamp could be triggered inadvertently.

Regularly air closed rooms to prevent build-up of
inadmissible ozone concentrations, which can occur
due to the use of high-powered flash systems.

During work in the studio generating much dust, the
appliance must be covered with suitable dust pro-
tection (not during operation).