User manual // Expert / Integra Pro (Plus)
24
HENSEL-VISIT International GmbH
The transmitter automatically defaults to one picture
after 200 ms. This is not dependent on the actual
number of exposures. This ensures that the set lighting
is always the first exposure and the mask lighting the
second exposure when using the FREEMASK
application.
10 Maintenance
The Expert / Integra Pro compact flash series is in need
of little maintenance by the user. The unit should be dry
cleaned from dust from time to time. Before cleaning
separate the unit from the mains outlet.
Caution: Under no circumstances is any part of the
equipment to be opened. The equipment is not
user-serviceable and there is dangerous high
voltage. In the event of difficulty notify your dealer.
Replacement of fuses
In case of a broken fuse 9 replace fuse only when the
unit is switched off and separated from the mains
outlet.
Attention:
Never repair or bridge fuses. Only use “fast” fuses
with the required value:
Fuse for operation with modeling light 300W / G6.35
halogen
Expert Pro series:
2 AF
Integra Pro series:
4 AF
Only use fuses in accordance with EN 60127-2/1 or
respectively IEC 127-2/1. A wrong fuse may cause a
bursting of the halogen modeling lamp.
Replacement of modeling lamp
Replace the modeling lamp only when unit is switched
off and unplugged from the mains outlet.
Make sure that the modeling lamp is protected by the
specified fuse (see paragraph
Replacement of fuses
above).
Summary of Contents for Expert Pro
