Hensel Expert Pro, User Manual

Page: 11 / 30

User manual // Expert / Integra Pro (Plus)
HENSEL-VISIT International GmbH
11
6 Overview of controls
Compact Flash Unit
– Controls Front Panel -
1 ON: main switch ON / OFF
2 RC*: remote control switch and ON indicator
3 AUDIO: acoustical ready signal and ON indicator
4 FC: flash check switch and ON indicator
5 SLAVE: slave switch and ON indicator
6 TEST: Manual flash release with ready indicator
7 Sync socket
8 Slave
9 Fuse 2 A (Expert Pro), 4 A (Integra Pro)
10 230V~/ 50-60 Hz resp. 115V~/ 60 Hz:
Mains connector
11 FULL: modeling lamp operation mode and ON indicator
12 PROP: modeling lamp operation mode and ON indicator
13 flash power control switch
14 LED display
Tilting head - components -
15 Cable fixation
16 Pre-friction*
17 Shifting of the tilting head to balance heavy loads*
18 Clamping screw to hold umbrellas
19 Locking screw for attaching unit to a stand
20 Wing nut for adjusting the angle of inclination
Radio transmitter - controls -
21a Flash power down and modeling light options*
21b Flash power up button*
22 Channel selector for 3 channels /
„All‟ option (sliding
switch)
23 Test button for flash triggering
24 Socket for sync cable, Ø 2.5 mm
25 Locking screw for mounting to the hot shoe of the camera
26 Gap for opening the battery compartment
Radio receiver - controls -
27 Channel selector for 3 channels (sliding switch)
28 LED green (sync voltage applied)
29 LED red (low battery)
30 Interface socket
31 Gap for opening the battery compartment
*: Additional features only available for the respective Plus version.