User Manual UV Flash Dry
UV Flash Dry
UV Flash Dry
UV Flash Dry 15/700
15/700
15/700
15/700
HENSEL-VISIT GmbH & Co. KG
15
A possible failure could be that the spark of the flash tube arches over to
the housing, note description of faults further below.
Work sites are generally very dusty. Therefore, the devices need to be
dusted off regularly. There is a filter mat built-in at the underside of the
trolley. This filter mat needs to be cleaned or changed periodically.
Proper use
Proper use
Proper use
Proper use
The UV Flash Dry 15/700 consists of a UV Strobe 15/700 flash generator
and UV flash head MH 15/700 with UV reflector and is used to dry
ultraviolet sensitive automotive repair products like fillers, foundations and
paints by company Spies Hecker and company Standox.
Use of the UV Flash Dry System is only permitted with products from
company Spies Hecker and company Standox.
The flash generator UV Strobe stores power which is released in the form
of ultraviolet flashes via the connected flash head. During this process,
the flash head with mounted reflector must be placed onto the intended
part or, if that is not possible, held above the part to be dried.
The spectrum of the flash is suited, in connection with chemical
characteristics of the ultraviolet-sensitive paint, to dry the paint with one or
more flashes (for drying times / number of flashes see paint
manufacturer’s product information).
Following the instructions
Following the instructions
Following the instructions
Following the instructions
Following the instruction manual and all other pertinent documents is part
of the intended use.
Summary of Contents for UV Flash Dry 15/700
Page 1: ......
