User manual UV Flash Dry
UV Flash Dry
UV Flash Dry
UV Flash Dry 15/700
15/700
15/700
15/700
14
HENSEL-VISIT GmbH & Co. KG
Description of services
Description of services
Description of services
Description of services
This system is used for drying small defects in paint work, mainly of
automobiles. Until now it was common to dry fillers and paint with
infrared and sometimes also with ultraviolet continuous light. The drying
times between each step were relatively long.
The UV Flash Dry System works with flash which has a very high light
intensity. The filler or paint is dry right after the flash procedure and the
next work process can be done. This substantially shortens the work time
(circa factor 10). The fillers and paints of Spies Hecker and Standox were
specifically developed for use with this system. The flash spectrum is
calibrated to match the spectral sensitivity of the paint components.
The user applies the reflector to the spot to be dried and presses both start
buttons simultaneously. The flash procedure is triggered. A light indicator
strip runs up alongside the flash head and indicates the charge level of
the generator. The system initiates the flash sequence automatically when
the end of the indicator strip is reached.
This procedure is repeated 10 times during each drying process. The
process is interrupted when you release both start buttons and the
indicator strip runs down.
When one or both start buttons are released, the fan on the trolley starts
up. The flash head needs to be placed in the intended holder on the
trolley. The flash head and the flash tube are cooled. The fan
automatically switches off after ca. 15 minutes.
If the area to be dried exceeds the lit area, the flash head must be moved
and the start buttons need to be pressed anew.
If the mains voltage is switched off on the trolley but the stored power is
still at a high level, the system dumps its power automatically (safety
feature).
If, for any reason, the system can not trigger flashes when both start
buttons are pressed, the ‚Error’ lamp on the flash head will light up.
Summary of Contents for UV Flash Dry 15/700
Page 1: ......
