User Manual UV Flash Dry
UV Flash Dry
UV Flash Dry
UV Flash Dry 15/700
15/700
15/700
15/700
HENSEL-VISIT GmbH & Co. KG
7
Safety hints pertaining to flash head and flash tube
Safety hints pertaining to flash head and flash tube
Safety hints pertaining to flash head and flash tube
Safety hints pertaining to flash head and flash tube
Explosion of flash
Explosion of flash
Explosion of flash
Explosion of flash ttttube
ube
ube
ube
The flash tube is filled with xenon gas. There is negative pressure inside
the flash tube. Plasma develops during flashing due to electrical energy
being changed to radiation. This plasma development then causes
positive pressure inside the flash tube. At the same time, the glass tube is
exposed to strong mechanical forces. Minimal defects of the fused quartz
glass, visually impossible to notice, may possibly lead to the explosion of
the flash tube.
•
In case the flash tube explodes, there is a danger of tiny glass
particles flying around. The user of this equipment needs to make
sure that he/she is protected (e.g. by wearing a pair of safety
goggles).
•
The flash tube can only explode during the flash process.
Therefore, the flash head should never be directed at a person
during flashing.
•
Immediately disconnect the flash head from the generator if the
flash tube becomes damaged. Electrodes carry high voltage!
•
Flash tubes must only be changed by authorized and trained
personnel.
•
The flash tube must only be changed after the device is
disconnected from the power supply and is completely discharged.
The flash head must be disconnected from the generator during the
flash tube change.
Risk of burns
Risk of burns
Risk of burns
Risk of burns from
from
from
from flash head
flash head
flash head
flash head
After flashing there is a risk of burns caused by the flash head due to hot
parts on the housing or infrared heat radiation.
Summary of Contents for UV Flash Dry 15/700
Page 1: ......
