User manual UV Flash Dry
UV Flash Dry
UV Flash Dry
UV Flash Dry 15/700
15/700
15/700
15/700
38
HENSEL-VISIT GmbH & Co. KG
Hold the new flash tube with both
hands near the electrodes and slide
it carefully onto the ceramic socket
up to the stop.
Then pull the flash tube
approximately 0.5mm back out so
that it does not rest too strongly on
the ceramic part. The glass tube of
the flash tube needs a bit of play to
be able to expand during the
flashing.
Ignition wire
It is absolutely necessary to make
sure that the ignition wire around
the flash tube has the greatest
possible distance to the perforated
sheet. Otherwise, there is a
possibility that the ignition spark
arches over to the perforated sheet.
In this case, the flash tube does not
flash.
3 Hex-nuts
Perforated sheet for flash tube
protection
Use a 6mm open-end wrench to
attach the perforated sheet with the
3 hex-nuts.
Summary of Contents for UV Flash Dry 15/700
Page 1: ......
