Hensel-Visit Nova D 1200, User Manual

Page: 9 / 64

Safety
9
Safety
The device has been built according to state-of-the-art technology and
recognized safety-related regulations. During work with and on the device,
however, residual risk remains, which could present a danger to life and
limb. For this reason, the following safety information is to be observed
and followed.
Intended use
The device is used to provide the electrical energy for certain indoor flash
heads. The device must be used only with the accessories described in
these instructions and released by the manufacturer.
Intended use also includes reading and fully understanding this manual, as
well as observing and following all information in this manual, especially
the safety information. In addition, the safety information and all other
information in the instructions for the cameras used, flash heads and radio
remote triggers are to be observed. Any other use is expressly considered
to be unintended use and will result in the voiding of warranty and liability
claims.
Fundamental safety information
Prevention of serious injuries or death from explosions
The device is not explosion-protected. When the flash tube is triggered,
sparks might arise, which could lead to an explosion. Serious injury or
death can result.

Do not use the device in explosive atmospheres.
Prevention of serious injuries or death from electric shock
Improper work on the device can lead to an electric shock.

Only connect the device to a power mains with an intact protective
contactor.

Only use plugs with contacts in perfect condition.

Protect the device from moisture.

Never use a wet device.

Do not open the housing.