Hensel-Visit Nova D 1200, User Manual

Page: 52 / 64

Error messages
52
Problem Possible cause(s) Remedy
Temperature error The temperature on the
capacitors is too high.

Switch off the device
immediately.

Send the device to
Customer Service,
specifying the error
number.
Trigger error – the
device did not release a
flash This error generally
resets itself
automatically and work
with the device can
continue. If this error occurs
frequently, proceed as
follows:

Make sure the trigger
wire is seated
properly.

Replace the flash tube
or send the device to
Customer Service.
ZD error

Switch off the device
immediately.

Send the device to
Customer Service,
specifying the error
number.
If this error occurs
frequently, proceed as
follows:

Send the device to
Customer Service,
specifying the error
number.