Hensel-Visit Nova D 1200, User Manual

Page: 27 / 64

Mounting and removing components of
the device
27
To remove the flash head from the device, proceed as follows:

Switch off the device with the main switch (2).

Completely undo the screw fitting.

Pull the round plug (1) upwards.
Flash head cable with 20-pin long plug
To connect the flash head cable to the device with the 20-pin long plug,
proceed as follows:

Make sure the device is turned off at the main switch (2).

Insert the long plug into the connecting socket.

In the process, observe the user manual of the corresponding flash
head.
To remove the flash head from the device, proceed as follows:

Switch off the device at the main switch (2).

Pull the long plug (1) upwards.
The flash heads used with the device must be connected using the
flash head cable labeled in yellow/red.