Hensel-Visit Nova D 1200, User Manual

Page: 41 / 64

Operating the device
41
Radio remote trigger
The device has a built-in radio receiver “Strobe Wizard Plus” and freemask
system. With the optionally available radio remote trigger, the camera and
flash can be synchronized by radio. To set the radio channels, proceed as
follows:

Briefly press the RC/CH button.
The LED display illuminates as green. The last channel selected appears on
the left display.

Press the RC/CH button for about two seconds. You can now switch over
between the channels using the arrow buttons (1, 2, 3, 4).

Briefly press the RC/CH button again to deactivate the radio mode
again.
The last channel selected is saved. The LED above the RCCH button goes
out.

Please also observe the instructions of the radio remote trigger.
After the C1, C2 and C3 radio channels of the HENSEL “Strobe Wizard
Plus” radio remote trigger system, the F1 to F3 radio channels for the
HENSEL freemask system appear.