14
How do you input passwords?
1. Press the Navigation button to change the numbers.
2. Press the OK button to confirm the number.
3. Press the Navigation button switch to the next numbers.
4. Press the OK button to confirm your selection.
5. Repeat the step one.
How to change the passwords?
In the measuring interface, hole and press the menu button for 5s
to change the passwords.
The first time, enter the old passwords.
The second time, enter the new passwords.
Then you can change the passwords.
Notes:
1. The read-only password is 0000. Under this password, you can only check the parameter but not change.
2. The make-changes password is 1234, enter this password, you can set the parameters.
3. You can change the password. If you forget the password, Please choose “Factory Default” in System
Setting, the password will Recover to factory password (1234) .
4. Every time enter into the Alarm Setting in the main menu, Alarm Volume and Alarm Pause in the System
Setting, you should input the password.
Enter the [Alarm Setting] interface.
You can select the Alarm on or off.
High limit SpO2 range is 71~100, Low Limit SpO2 range is 70~99
High Limit PR range is 31~250, Low Limit PR range is 30~249
Fig.5.3
Fig.5.4
Summary of Contents for 900-8275
Page 65: ...65 ...
Page 133: ...133 ...
