13
5 SETTINGS
5.1 System Setting
Pick and enter the [System Setting] interface from the main menu. And then press the Navigation buttons
to select different item to set.
Fig.5.1
Fig.5.2
Alarm Volume:
you can adjust the value of alarm volume, there are 7 levels, and the default level is 3
Alarm Pause:
there are two modes, 60s and 120s, and the default mode is 120s. The device audibly alarm
upon new alarm conditions.
Beep Tone:
the level is from 0 to 7, and the default level is 3.
Backlight Setting:
the level of brightness is from 1 to 7, and the default level is 3.
Language:
English, French, German, Spanish, Italian, Japanese, Russian and Chinese.
Screen Sleep Mode:
1minute, 10 minutes, 30 minutes, screen always on, and the default is 1 minutes
Charging management:
Charging activated, Charging stop.
ID setup:
➀
press OK button,
➁
press Navigation button to change the number,
➂
press OK button to
confirm.
Factory Default:
recover to factory reset.
Note:
1. Every time enter into the Alarm Volume and Alarm Pause, you should input the password, refer to Alarm
Setting.
2. The ID range is 1~127.
5.2 Alarm Setting
Pick the [Alarm Setting] interface from the main menu. Before setting, please enter password (1234) to set
the parameter. Or you can direct access to check the parameter but not to change.
Summary of Contents for 900-8275
Page 65: ...65 ...
Page 133: ...133 ...
