Henny Penny EEG-16X, Operator'S Manual

Page: 91 / 94

T
roubleshooting
81
Display Cause Panel Board Correction
“E-60”
“FILTER IN
USE” AIF PC board not
communicating
with PC board. Turn power switch to OFF, wait 15 seconds, then turn
switch back to ON. If “E-60 persists, have connector be-
tween the PC boards checked; replace AIF PC board or
control PC board if necessary.
“E-70C” Drain valve jump-
er wire missing or
disconnected. Have the jumper wire checked on the PC board at drain
switch interlock position.
“E-83-A” Pressure too
high. Check filter system in Vat #1.
“E-83-B” Pressure too
high. Check filter system in Vat #2.
“E-83-C” Pressure too high Check filter system in Vat #3.
“E-83-D” Pressure too
high. Check filter system in Vat #4
“E-83-E” Pressure too
high. Check filter system in Vat #5.
“E-83-J” Bulk BIB FILL
switch ON when
pressure too
high. Check BIB fill valves.
“E-83-R” Bulk Dispose
switch ON when
pressure too
high. Check Bulk Dispose quick-disconnect behind fryer.
“E-931”
”24 VDC
SUPPLY
TRIPPED” Autolift motor
malfunction or
failure. If AutoLift feature is not operating, have each of the Auto-
lift motors checked.