2.
Press Enter to open the menu.
3.
If Soft-air is not enabled, enable it. Press Enter and use the cursor keys
▲
and
▼
to turn Soft-
air ON. Press Enter.
4.
Use the cursor keys
▲
and
▼
to go to the value for the Soft-air time and press Enter.
5.
Set the desired value using the cursor keys
▲
and
▼
and press Enter.
6.
Press the cursor key
◄
to return to the menu.
7.
Close the lid to start sealing.
6.2.5.17 Dealer Information
If dealer information is entered into the machine, this will be displayed on the start-up screen.
6.2.6 Terminating a Program
Programmes such as the packaging program or the pump cleaning program can be terminated at
any time.
1.
Terminate the program.
Press the – / STOP button.
The program will be terminated and the vacuum chamber is decompressed.
6.2.7 Printer
A printer can be connected to the machine to print package labels.
6.2.7.1 Connecting a Printer
To connect a printer to the machine, follow the steps below:
1.
Connect the printer to the mains supply.
2.
Connect the printer to the USB connector on the machine.
3.
Turn on the printer.
4.
Select the correct printer in the machine menu.
a.
Open the menu.
b.
Enter the owner code 1324.
c.
Go to Settings.
d.
Go to 1.1 Printer.
e.
Select ZD410.
f.
Press the cursor key
◄
to return to the menu.
6.2.7.2 Creating a Label
To create a label, perform the steps below:
1.
Open the menu.
2.
Enter the owner code 1324.
3.
Go to Settings.
4.
Go to 1.1 Printer.
5.
Go to Labels.
6.
Enter the desired information.
Operation 46