10
EN
4.3. PACKING REMOVAL – OPENING MODALITY
PACKING DECRIPTION – HOW GET RID OF THE PACKING MATERIAL
The machines are packaged so that the seepage /
liquids insight, organic matters or alive beings is
avoided: it is represented from a
covering in poly-
ethylene around the machine
, and all inserted in a
cardboard box
of adequate size. The empty spaces
within the box are occupied from the
fill material
.
Don’t waste the packaging in the environment, but
restore it for possible transportations or to address
it to the recycling agencies.
The evaluation and the management with the aims
of the biological compatibility of the products used
in the packaging, are of the user competence and
responsibility.
It is an employer obligation
to be acquainted of the
actual laws in own country and work so that to
observe these legislations.
It is forbidden and besides liable to fines
, leave
the machine and the electric equipment in the en-
vironment.
4.4. PREPARATION PRELIMINARY OPERATIONS STABILITY
The machine stability is designed so that, in the
foreseen functioning conditions, taking into ac-
count of the climatic conditions, is such as to allow
the use
without reversal risk, fall,
or
inopportune
movement.
Taking into account of the conformation and its po-
sition, the machine results to be intrinsically steady
without fastening needs to the working ground.
4.5. ELECTRIC FEEDING
The electric feeding connection must be in conform-
ance with the
country legislation in which is used.
The electric feeding
so must be maintained in
conformance with the following technical prescrip-
tions:
• The electric feeding
must be always of type and
have an intensity corresponding to the specifica-
tions indicated in the machine plate. If excessive
voltages are applied, some components will be
damaged
irreparably,
• A differential device must be foreseen
coordi-
nated with the protection circuit, respecting the
legislation, the legislative and regulated dispos-
als in force in the installation country;
• The electric feeding cable outside the machine
cover
must be made pass in the spaces prepared
from You and adequately protected;
• If present
the neutral conductor (N)
before feed-
ing the electric equipment, as for You its continui-
ty must be guaranteed (connected and available).
• Before to feed the electric equipment, as for You
must be guaranteed the continuity of the green
yellow conductor of the protection equipotential
circuit.
4.6. ELECTRIC FEEDING SECTIONING DEVICE
The feeding sectioning device, as comparable from
what described in the power circuits diagram de-
livered with the electric equipment, is supplied for
the machine feeding unique source.
In case of incompatibility between the net socket
and the device plug
change the socket with another
type suitable from maintenance personnel.
The feeding sectioning device allows to
separate
(insulate) the machine electric equipment
from
the feeding, with the aim to make possible the
interventions
performing
without electric shocks
risks.
The sectioning device presents two possible posi-
tions:
