18
EN
At the end of every
shift work and
however before
the daily use
Operator
PRODUCTS NOT TO USE
• Compressed air with jets towards the zones with flour warehouses and in
general towards the machine;
• Vapor equipment;
• Detergent that contains CLORO (also if diluted) or its compounds as: the
bleach, the muriatic acid, products to clear the drain, caustic soda products
for the marble cleaning, in general decalcifying, etc… can attack the steel
composition, staining and oxidizing it unavoidable. The only above described
products fumes can oxidize and in any case corrode the steel;
• Steel wool, brushes or abrasive discs produced with other metals or alloys
(ex. Common steel, aluminum, brass, etc…) or tools that have previously
cleaned other metals or alloys, that except to scratch the surface.
• Detergents in abrasive dust;
• Fuel, solvents or inflammable and/or corrosive fluids;
• Substances used to clean the silver.
6. SELLING
The crossed container symbol on the machine
shows that the product at the end of its useful life
must be collected separately from other refusals
If we decide to not use ever the machine because
it is obsolete, damaged or worn, its out of service
must be entrusted to specialized and trained per-
sonnel. At the end of the dismantling activities all
identification plates and other document must be
destroyed. The machine can be sold without the
possibility to reduce it in small pieces; it is suffi-
cient to disconnect the main groups that compose
it and to send them for the scrapping.
Don’t sell the machine like mixed urban refusal,
perform the waste separation.
The machine collection or harvest systems are:
• Collection through distributor consortium
• Delivery possibility to the machine distributor
equivalent to the purchasing certificate of a new
machine.
In the machine there aren’t dangerous substanc-
es with potentially negative effects on the ambient
and on the human health. It is fundamental that the
purchasers contribute to the reuse, to the recycling
and to the other forms of machine restoring. It is
the employer obligation to be aware of the actual
laws of own country and work so to be comply with
these legislations.
It is forbidden and besides liable of penalties to
leave the machine and the electric equipment in
the ambient.
