Hendi 210864, User Manual

Page: 5 / 84

5
EN
• Only connect the appliance to an electrical outlet with the Voltage and frequency
mentioned on the appliance label.
• Avoid overloading.
• Turn off the appliance after use by removing the plug from the socket.
• Always remove the plug from the socket when fi lling or cleaning the appliance.
• The electrical installation must comply with the applicable national and local reg-
ulations.
• This appliance is not intended for use by persons (including children) with re-
duced physical, sensory or mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
3. IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be fol-
lowed including the following:
• It is for household use and semi-professional: Do not use outdoors.
• Unplug from outlet while not in use, before putting on or taking off parts, and before
cleaning.
• Unplug when assembling and disassembling the unit.
• Close supervision is necessary when any appliance is used near children.
• When carrying the unit be sure to hold the body with both hands. Do not carry the unit
by the hoppper plate or head.
• Do not fi x the cutting blade and cutting plate when using kibbe attachment.
• Never push products by hand. Use food pusher.
• Do not grind hard food such as bones, nuts, etc.
• Do not grind ginger and other materials with hard fi ber.
• Continuous running of meat grinder should be not more than 10 minutes with the
following 10 minutes interval for motor cooling.
• Operate the unit from “ON” to “R” or from “R” to “ON” after the previous working
condition stops more than 30 seconds, or it may cuase some unnormal case such
as moving up and down and easily destroy the unit.
• To avoid jamming, do not force to operate the unit with excessive pressure.
• When the circuit breaker activates, do not switch on.
• Never try to replace the parts and repair the unit by yourself.
• Do not immerse cord or the body of mixer into water as this would give rise to
electric shock.