3
EN
Dear Customer,
Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the
appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very
carefully.
Technical data
Model Version
Dimensions
Power/Voltage
Weight
Cable
(mm)
(W/V)
(kg)
208878
automatic
160x290x(H)510
420 W/230 V, 1N, 50 Hz
10.5
3x0,75 mm
2
, H05 RN
208885
electronic
160x280x(H)510
420 W/230 V, 1N, 50 Hz
10.0
3x0,75 mm
2
, H05 RN
Unpacking, installation and connection
On opening the packaging, check carefully to make
sure the appliance is intact and that there are no
sing of damage. If in any doubt contact immediately
your dealer that will help you in a professional way.
The packaging materials should be collected and
disposed in conformity with the safety rules in force.
Keep out of the reach of children and irresponsible
persons because are potential sources of danger.
If you decide not to use the appliance anymore re-
member to unplug it so that it cannot be used, and
then cut the cable in the point where it comes out
of the appliance. Contact specialized fi rms for in-
formation on the disposal of the components of the
appliance.
The installation must be carried out only by pro-
fessionally qualifi ed persons who are authorised to
perform such tasks and must be comply with the
regulations in force in the place in which the appli-
ance is installed . Incorrect installation may result in
injury of persons or animals, or damage to property,
for which the manufacturer cannot be held respon-
sible.
Before using the appliance read carefully the notices
and the instructions:
• The appliance must be placed on a stable, fl at sur-
face.
• Not installed outside.
• Make sure that the appliance is not resting on the
power supply cable.
• Make sure the voltage and frequency values of the
supply mains correspond to the ratings indicated
on the label featuring the appliance’s technical
data.
• Make sure the ratings of the system are suitable
for the power absorbed by the appliance and/or
maximum voltage.
• It’s compulsory to earth the appliance. Check that
the grounding system is in compliance with the
actual safety laws.
• The external equipotential terminal must be con-
nected to a equipotential node
.
• Three fase version: connect the motor correctly so
the blade, if viewed from the grinder, rotate clock-
wise.
General warnings
Read thoroughly and stick closely to the instructions
and warnings.
Always remove the plug from the socket before carrying
out any maintenance or clearing of the appliance.
SINGLE PHASE models are supplied complete with
cable and plug for connection to the socket.
Any tempering with the machine or connections not
complying with the above indications invalidate the
manufacturer’s guaranty.
