AtlasLink User Guide
5
PN 875-0352-D Rev A4
Chapter 2: Installing AtlasLink
Display, Mounting, and Connector
All connections and ports are located on the bottom of the unit, as shown in Figure 2-1. Table
2-1 provides additional information about each port/connection.
Mounting
holes
Power/data
connector
LED
display
Figure 2-1: AtlasLink
Table 2-1: AtlasLink ports and connections
Port/Connection
Description
Mounting holes
Four off-set mounting holes. Two adapters are available, the first
includes a marine 1” standard, adaptable to 5/8”. The second allows for
flush mounting the unit.
Power, data port (12-pin)
External power/data cable; allows you to supply power to AtlasLink as
well as communicate with external devices via CAN, NMEA 0183 serial,
and binary
LED Display
AtlasLink uses a single LED (see Figure 2-1) that provides system information based on the color of
the LED as follows:
•
Blinking Red - Power on
•
Blinking Amber - GNSS position available, including RTK float and Atlas
•
Blinking Green - RTK-fixed or Atlas-converged position available
•
Blinking any color – Receiver operational
If at any time the LED turns to a solid color for an extended period of time, the
receiver has malfunctioned
All manuals and user guides at all-guides.com
