AtlasLink User Guide
12
PN 875-0352-D Rev A4
Chapter 2: Installing AtlasLink
Connecting to AtlasLink Web UI
In order to access the AtlasLink smart antenna’s web UI, you must connect to its WiFi access point
using a computer, tablet, or phone. By default, the access point will be named “atlaslink_########”
where ######## is replaced by the ESN (Electronic Serial Number) of your unit. The default
password
for
accessing
it
is
“hgnss1234”.
You can find your AtlasLink smart antenna’s ESN on a label on its base (see below).
Once connected to the access point, the web UI may be accessed using a web browser pointed to the
URLs http://atlaslink or http://192.168.100.1. Both will load a web page similar to the following
screenshot, with various menu options to access features of the user interface.
The default WiFi settings mentioned above can be changed (see the “Configuration – WiFi” section),
and we recommend you change this password from the default one at your earliest convenience.
All manuals and user guides at all-guides.com
