4
Safety instructions
• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse cord, plug or appliance in
water or any other liquid.
• Unplug from outlet when not in use and before cleaning. Allow the device to cool
before putting on or taking off parts. Do not operate any appliance with a dam-
aged cord or plug or after the appliance malfunctions, or has been damaged in
any manner.
• The use of accessory attachments not recommended by the appliance manu-
facturer may cause injuries and invalidate any warranty you may have.
• Do not use outdoors, or on or near direct heat sources
• Do not let cord hang over edge of table or counter, or touch hot surfaces or
come into contact with the hot parts or allow the product to be situated under-
neath or close to curtains, window coverings etc.
• This appliance is for household use only and only for the purpose it is made for.
• The appliance must be placed on a stable, level surface.
• This appliance is an attended appliance, and as such should never be left ON
or whilst hot without adult supervision.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Parts description
1.
Spool pin
11. Handwheel
2. Winding thread guide
12. On/Off switch
3. Thread tension dial
13. Foot pedal receptacle
4. Pattern selector
14. Transformer receptacle
5. Thread tension release bar 15. Adaptor
6. Thread cutter
16. Foot pedal
7. Needle clamp screw
17. Threader
8. Presser foot
18. Bobbin winding pin
9. Transparent cover
19. Spool pin Needles (3x)
10. Reserve sewing lever
21. Twin needle Bobbins (4x)
Before first use
• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main voltage of your
home. Rated voltage : AC220-240V 50Hz.
Connecting to the power source
Get the adaptor (no. 15) and the foot pedal (no. 16).
• Connect plug “A” to the machine and plug “B” into the wall outlet
• Turn on power switch “ON”.
• Connect the foot control “C” to the machine.
• The speed of the machine can be regulated by applying pressure to the foot controller.
Press the on/off switch to “ON” for power, the sewing light will burn.
