9
Functions of the control panel
In the control panel, you set the start time, duration, temperature and humidity. You can
also choose if you want a sauna with or without steam.
Functions of the control panel:
1.
Start and stop the sauna
- With timer
- With last used sauna program
2.
Change the settings during the sauna bath
3.
Turn on the light and fan
1.
Push ON/OFF
The display shows:
2.
Push SAUNA WITH STEAM
The display shows the start time 00:00. It
means that the heater will start immediately after
you have finished the programming.
The indication lamp ”Sauna with steam” starts to blink
3.
Set the start time with button PROG OK
The indication lamp ”Start time” starts to blink
Turn on the sauna
The control panel gives you two options how
to turn on the sauna. The options are:
- With a timer
- With last used program.
You can also choose between normal and
steam sauna bath.
With a timer
Example: Sauna with steam
You want to have a sauna with steam. The time is 16:00 and you want the sauna heater
to start heating at 18:00. You want the temperature 65
O
C, duration 50 minutes and
humidity 35 %.
By holding the arrow button
pressed the values are paged
up or down rapidly.
Tips and advice
The settings starts and stops
with a the button PROG OK.
Before you turn on the sauna
heater you must check that the
sauna is ready to be used.
Observe
In
fo
rm
a
tion
for
the
user
