4
Maintenance
Water tank
The water tank should be drained after
using the sauna. Remove impurities
with solvent and a hard brush.
Be careful when emptying the water
tank. The water has a temperature of
100
O
C.
Sauna stones
Brush and rinse the sauna stones free
from grit before placing them in the
stone compartment. If the stones begin
to crumble, replace them as soon as
possible.
The sauna
The sauna should be kept free of dirt
and odors. Remove any stains of water
and salt with gentle soap and water.
Furthermore, be careful not to keep
laundry and other fire hazardous
materials close to the heater.
Alarm
In an alarm situation, the control panel
stops the heater, and the cause of the
alarm is shown on the display of the
control panel. Check the alarm and
restart the sauna heater.
Short facts about the
sauna heater
Output:
6 – 9 kW
Sauna volume:
5 – 13 m³
Amount of stones:
23 kg
1. Turn on the light and fan
by pushing the specific button
2. Turn off the light and fan by
pushing the specific button.
The temperature sensor cable is
broken or the overheating protection
has been triggered. Check the sensor
cable. Reset the sensor by pushing
the reset button. Offset the control
panel by pushing the button PROG OK.
The water tank is empty. Fill the tank
with water. Offset the control panel by
pushing the button PROG OK.
!
Warning!
In
fo
rm
a
tion
for
the
user
Turn on/off the light
and the fan
