Operating Instructions • ATS3080 • 02-2017 • v01 • 102-01002
Safety warnings
8
2 4 2 Specialist personnel for maintenance and
servicing
Always have maintenance and servicing carried out by duly
qualified specialist personnel. These individuals have the
specialist training that affords sufficient knowledge of the
ATS3080 for them to judge when it is in safe working order.
These individuals are also familiar with the following rules
and regulations:
• Applicable national health and safety regulations
• Accident prevention regulations
• Generally accepted rules of engineering practice (e.g.
employers' liability insurance association codes, DIN
standards, VDE regulations, technical rules of other
European Union Member States or other signatories of
the Agreement on the European Economic Area).
2 4 3 Qualified electrician
Work on the electrical supply and on parts that are live when
the device is in operation should always be carried out by a
trained electrician.
2 4 4 Authorised specialist for repair and testing
Only service technicians from HellermannTyton or service
technicians certified by HellermannTyton are permitted to
carry out repairs and safety checks.
2 5 Underlying hazards associated with use of the
ATS3080
2 5 1 Cleanliness at the workplace
Orderliness, good lighting and cleanliness at the workplace
all help to make work easier, minimise hazards and reduce
the risk of injury.
Always comply with the following principles of orderliness
and cleanliness at the workplace.
f
Put tools away as soon as they are no longer needed.
f
Avoid trips (e.g. immediately dispose of waste by placing
it in the containers provided for the purpose).
f
Immediately remove spillages of grease, oil and other
liquids.
f
Clean smears off the controls.
2 5 2 Spare parts and accessories
f
Use only original replacement parts.
f
After parts have been replaced, always check that
everything is in full working order.
f
Use only accessories approved by HellermannTyton.
Accessories can affect the way in which the ATS3080
works.
