Evolution™ Electric Bed LI156Ex
QD1532A(2)
29
USER MANUAL
IN
S
T
RUCT
IO
NS
F
O
R
U
S
E
- Disconnect the main power cord and secure it on the bed as shown in
section 4.9
- Fit the headboard between the bedside cabinet and the Head section or on
the head supports
- Lock out the electric functions of the bed before moving the bed and
bedside cabinet to prevent any accidental handling that knocks the
bedside cabinet against the structure of the bed.
4.17.2 Removing the bedside cabinet from the bed:
- Move the bed away from the wall to obtain free access for removing the
bedside cabinet, then apply the brakes
- Connect the mains power cord
- Remove the headboard
- Unlock the electric function of the bed if necessary
- Operate the Variable Height lower function so that the bedside cabinet
castors touch the floor and the bedside cabinet is no longer supported by
the rails
- Remove the bedside cabinet from its support rails, avoid crushing or
pulling the main power cord when carrying out this operation
- Fit the headboard
- Release the brakes, put the bed back into its position, then apply the
brakes
- Set the sleep surface to the required auto-contour position.
4.18 LOCKOUT SWITCHES PROTECTION
The lockout switches protection permit
to protect them against an accidental
lockout or unlock.
NOTE :
This protection can be unclipped
for cleaning.
