Helion 2 XP50 PRO, Manual, Page: 89 / 96

Solution
If the image does not clear after calibration, you need to recalibrate.
☐
The image is too dark
Possible cause
Brightness or contrast level is too low.
Solution
Adjust the brightness or contrast level in the Quick Menu .
☐
Poor image quality / Detection range reduced
Possible cause
Problems described may arise in adverse weather conditions (snow, rain, fog, etc.).
☐
Smartphone or tablet PC cannot be connected to the
device
Possible cause
Password in the device was changed.
Solution
Delete network and connect again inserting the password saved in the device.
Possible cause
There are too many Wi-Fi networks in the area device is located which may cause signal
interference.
Solution
To ensure stable Wi-Fi performance, move the scope to an area with few or no Wi-Fi
networks.
More information on solving problems with connection to Stream Vision by following the
link